Bathroom vanities
La Kova makes bathroom vanities and storage units for homes in Bangalore, Hyderabad and Chennai, alongside our kitchens and wardrobes. They are built in the Wood & Metal factory in Bangalore on the same boiling-water-resistant plywood, with the same finishes, hardware and factory-sealed edges.
Built for water
A bathroom is wet every day, and the cabinet under the basin takes most of it. The bodies are calibrated BWR and BWP plywood, the grades that resist the swelling and rot blockboard suffers when it gets wet.
Every exposed edge is sealed on a precision edge-bander in the factory rather than glued by hand on site. A raw or badly sealed edge is where water gets into a vanity first.
The same finishes as the kitchen
Natural wood veneer, PU-lacquered glass, anti-fingerprint matte acrylic or laminate, with hardware to Blum and Hettich standards. A vanity can match the bedroom it opens off, or stand on its own against the stone.
And storage for any room
The same factory makes storage units for the rest of the house, each drawn for the wall it stands against.
At a glance
What decides the price
Size
The width of the vanity and how many drawers and doors it holds.
Finish
Laminate costs least. Matte acrylic, lacquered glass and natural veneer cost more.
We price each vanity from the drawings for your bathroom.
How to start
-
Send us the room
A floor plan, the wall measurements or a photograph, through the contact page. Leave a number and we will call you back.
-
We measure it
We come to the house and measure it properly, including the wall that is out of plumb and the beam nobody mentioned.
-
You see it in 3D
We design it with you in 3D. Finishes and hardware are chosen and settled before a single panel is cut.
-
Made, then fitted
The approved drawings go straight to the CNC routers in the Bangalore factory. Every unit is edge-banded and checked there, then fitted in your home by our own team.
Questions
Do you make vanities and storage units?
Yes. Alongside kitchens and wardrobes we make bathroom vanities and storage units for any room, in the same plywood, finishes and hardware, and to the same factory finish.
What plywood does La Kova use?
Every cabinet body is built on calibrated boiling-water-resistant plywood, the BWR and BWP grades often sold as marine plywood. It resists the sagging, swelling and rot that local blockboard suffers when a sink leaks or the air turns humid, which is why it belongs in a kitchen.
What is factory edge-banding, and why does it matter?
Edge-banding seals the raw edge of every panel. We do it on precision machines in the factory instead of gluing strips by hand on site, so the edges are straight, tight and sealed all round. That stops water getting into the plywood and edges peeling, two of the most common complaints about carpenter-made kitchens.
Which finishes can I choose from?
Natural wood veneers, PU-lacquered glass, anti-fingerprint matte acrylic and laminates. Veneer gives real grain, lacquered glass a deep wipe-clean gloss, matte acrylic a smooth face that does not hold fingerprints, and laminate the hardest-wearing surface for the least money.
Guides
- BWP, BWR or MR plywood: what kitchen cabinets should be built on MR, BWR and BWP plywood, blockboard, MDF and HDHMR compared for kitchen and wardrobe cabinets: what the grades mean and why the sink unit decides.
- Acrylic, laminate, veneer or lacquered glass: choosing kitchen shutter finishes Acrylic, laminate, natural veneer and PU-lacquered glass compared for kitchen shutters: how each looks, wears, cleans and ages, and where each belongs.
- Kitchen hardware: hinges, drawers, larders and corners Soft-close hinges, tandem drawers, pull-out larders, corner units and lift-up wall cabinets explained: what each does, where it goes and what to check.
Also made
- Bespoke kitchens Luxury modular kitchens, made to order for homes in Bangalore, Hyderabad and Chennai: designed with you in 3D, CNC-cut from BWP plywood, Blum and Hettich hardware.
- Wardrobes and walk-in closets Custom wardrobes, walk-in closets and dressing rooms for homes in Bangalore, Hyderabad and Chennai. Hinged or sliding, in veneer, acrylic, glass or laminate.
Our work
-
Verdure
One deep green from the base cabinets to the wall units, a brass knot handle on every door, and wardrobes of timber and cane in the same house.
-
Alabaster
A design visualisation: a marble waterfall island under fluted glass, a run of tall units, a pantry wall lit from within and a utility behind.
-
Daylight
A design visualisation of the double-height rooms around Alabaster: a living room in green stone and tall curtains, and a panelled stair hall.
Send us a photograph of the bathroom, or its plan.